思路：
软件安装后，运行软件时，通过电脑机器码的唯一性实现授权码的唯一性。（机器码：由cpu序列号、硬盘序列号、mac地址、主板序列号组成的字符串截取部分字符）
方案：
1、运行软件，检测注册文件，若未检测到注册文件或者注册文件中的注册码与机器码进行DES+base64加密后的编码不一致，则提醒用户输入注册码或重新获取注册码。重新获取注册码会将程序运行后显示的机器组合码 发送给指定管理员，管理员经过编码生成注册码给回用户，用户输入，生成注册文件，进入软件。
2、注册文件中注册码与机器码进行DES+base64加密后的编码一致，则通过认证 进入软件。
代码：
# -*- coding: utf-8 -*-
import wmi
import base64
from pyDes import *
class Register:
def __init__(self):
self.Des_key = "abcdefgh" #Key,需八位
self.Des_IV = "\x11\2\x2a\3\1\x27\2\0" # 自定IV向量
# 获取硬件信息，输出macode
# 1、CPU序列号（ID） 2、本地连接 无线局域网 以太网的MAC 3.硬盘序列号（唯一） 4.主板序列号（唯一）
global s
s = wmi.WMI()
#cpu序列号
def get_CPU_info(self):
cpu = []
cp = s.Win32_Processor()
for u in cp:
cpu.append(
{
"Name": u.Name,
"Serial Number": u.ProcessorId,
"CoreNum": u.NumberOfCores
}
)
return cpu
#硬盘序列号
def get_disk_info(self):
disk = []
for pd in s.Win32_DiskDrive():
disk.append(
{
"Serial": s.Win32_PhysicalMedia()[0].SerialNumber.lstrip().rstrip(), # 获取硬盘序列号，调用另外一个win32 API
"ID": pd.deviceid,
"Caption": pd.Caption,
"size": str(int(float(pd.Size)/1024/1024/1024))
}
)
return disk
#mac地址（包括虚拟机的）
def get_network_info(self):
network = []
for nw in s.Win32_NetworkAdapterConfiguration():
if nw.MacAddress != None:
network.append(
{
"MAC": nw.MacAddress,
"ip": nw.IPAddress
}
)
return network
#主板序列号
def get_mainboard_info(self):
mainboard = []
for board_id in s.Win32_BaseBoard():
mainboard.append(board_id.SerialNumber.strip().strip('.'))
return mainboard
# 由于机器码矿太长，故选取机器码字符串部分字符
def getCombinNumber(self):
a = self.get_network_info()
b = self.get_CPU_info()
c = self.get_disk_info()
d = self.get_mainboard_info()
machinecode_str = ""
machinecode_str = machinecode_str + a[0]['MAC'] + b[0]['Serial Number'] + c[0]['Serial'] + d[0]
selectIndex = [8,10,15,16,17,30,32,38,43,46]
macode = ""
for i in selectIndex:
macode = macode + machinecode_str[i]
return macode
#DES+base64加密
def Encryted(self,tr):
k = des(self.Des_key, CBC, self.Des_IV, pad=None, padmode=PAD_PKCS5)
EncryptStr = k.encrypt(tr)
return base64.b32encode(EncryptStr) # 转base64编码返回
# 获取注册码，验证成功后生成注册文件
def regist(self):
key = input('please input your register code:')
#由于输入类似“12”这种不符合base64规则的字符串会引起异常，所以需要增加输入判断
if key:
ontent = self.getCombinNumber()
tent = bytes(ontent, encoding='utf-8')
#得到加密后机器码
content = self.Encryted(tent)
key_decrypted = bytes(key, encoding='utf-8')
if content!=0 and key_decrypted!=0:
if content != key_decrypted:
print("wrong register code, please check and input your register code again")
self.regist()
elif content == key_decrypted:
print("register succeed.")
#读写文件要加判断
with open('register.txt', 'w') as f:
f.write(key)
f.close()
return True
else:
return False
else:
return False
else:
self.regist()
return False
# 打开程序先调用注册文件，比较注册文件中注册码与此时的硬件信息编码后是否一致
def checkAuthored(self):
ontent = self.getCombinNumber()
tent = bytes(ontent, encoding='utf-8')
# 获得加密后的机器码
content = self.Encryted(tent)
# 读写文件要加判断
try:
f = open('register.txt','r')
if f:
key = f.read()
if key:
key_decryted = bytes(key, encoding='utf-8')
if key_decryted:
if key_decryted == content:
print("register succeed.")
else:
print('请重新输入注册码,或发送', ontent,'到13900000000获取注册码')
self.regist()
else:
self.regist()
else:
self.regist()
else:
self.regist()
except:
print('请发送', ontent, '到13900000000获取注册码')
self.regist()
if __name__ == '__main__':
register = Register()
#print(register.get_disk_info())
#print(register.get_network_info())
#print(register.get_mainboard_info())
#print(register.getCombinNumber())
#print(register.Encryted(register.getCombinNumber()))
#register.regist()
register.checkAuthored()
参考地址：python读取电脑识别码_三更雪的博客-CSDN博客_python获取机器码